Ferrari wheels on your Volvo? Yep. What fits you?

Kinja'd!!! "Grindintosecond" (Grindintosecond)
04/03/2018 at 12:39 • Filed to: None

Kinja'd!!!3 Kinja'd!!! 18
Kinja'd!!!

In discovering what I can say about selling winter wheels/tires for a RAV4, I went looking for what other cars they can fit. That led me to the oversimplistic named !!!error: Indecipherable SUB-paragraph formatting!!! website where you search your wheel size/offset/bolt pattern/etc. and see what cars you can raid for wheels, worldwide I believe.

I learned, if I wanted, I could import wheels from a Chinese BYD F5...

Kinja'd!!!

and slap them on my RAV. Or, perhaps I could sell my 60% used winters to a BYD owner, if they had a Chinese craigslist, and ship them to China so they can brag about whatever the  BYD owners brag about over there. Apparently, that’s something having to do with tea service in the middle of a parking lot. It appears he is on his phone so he’s probably going to get run over by the BYD coming his way.

So what fits you? Check for your wheel size on the first tab, then move to the right tab and search by your size. If you want other options, play with the widths but if you go up in that, then increase the offset just a little here and there to see what else pops up. an inch wider I thinks could need a half inch offset extra to compensate so there you go.Have fun and I hope you find that set of Maybach rims you’ve been looking for to fit your Daewoo.


DISCUSSION (18)


Kinja'd!!! CalzoneGolem > Grindintosecond
04/03/2018 at 12:44

Kinja'd!!!0

wheel-size.com is the shit.


Kinja'd!!! Long-Voyager > Grindintosecond
04/03/2018 at 12:44

Kinja'd!!!0

Anything with a 5x100 bolt pattern fits both my car and my van.


Kinja'd!!! Rainbow > Grindintosecond
04/03/2018 at 12:49

Kinja'd!!!0

The Kia Soul.... apparently is the only vehicle in the world that uses the dimensions it does. I wish there was a way to search by JUST the offset, center bore, and bolt pattern, leaving the diameter and width variable.


Kinja'd!!! Stapleface > Grindintosecond
04/03/2018 at 12:50

Kinja'd!!!0

Maybe the car is a Hitman, and he’s summoning it to take out the unsuspecting woman who doesn’t know any better?

I can’t seem to figure out the wheel size website. All it does is give me my wheel size. Unless you mean you need to search for every car that has a similar size and bolt pattern. That seems rather labor intensive. I thought it could just tell me what other vehicles use that size.
Edit: I’m an idiot. Nothing too exciting, just a Sedona and an Isuzu Oasis, which was a rebadged Honda anyway.


Kinja'd!!! cmill189 - sans Volvo > Grindintosecond
04/03/2018 at 12:53

Kinja'd!!!0

This is what pops up a lot when I’m looking for BBS wheels on eBay. 355's share the 5x140 bolt pattern.


Kinja'd!!! Grindintosecond > Stapleface
04/03/2018 at 13:04

Kinja'd!!!1

once you have your wheel size, click the other tab to the right and search by wheel, there it will tell you what cars and what years of them that wheel size fits.


Kinja'd!!! KingT- 60% of the time, it works every time > Grindintosecond
04/03/2018 at 13:05

Kinja'd!!!3

Speaking of Ferrari Wheels on a VOLVO

Kinja'd!!!


Kinja'd!!! Grindintosecond > Rainbow
04/03/2018 at 13:05

Kinja'd!!!1

hmm...could just change the width and re-try that way a buncha times


Kinja'd!!! HammerheadFistpunch > Grindintosecond
04/03/2018 at 13:06

Kinja'd!!!1

what other wheels fit my car?

Kinja'd!!!

oh, okay then.


Kinja'd!!! Grindintosecond > KingT- 60% of the time, it works every time
04/03/2018 at 13:06

Kinja'd!!!1

Kinja'd!!!


Kinja'd!!! ToyotaFamily > Grindintosecond
04/03/2018 at 13:11

Kinja'd!!!0

Personally I love seeing VW’s using Audi & Mercedes wheels. They share the 5x112 pattern.


Kinja'd!!! Grindintosecond > HammerheadFistpunch
04/03/2018 at 13:14

Kinja'd!!!0

LOL. start picking widths and see. increase the offset a bit if you up the width and some may show up.


Kinja'd!!! Steve is equipped with Electronic Fool Injection > Rainbow
04/03/2018 at 13:17

Kinja'd!!!1

5X114.3 is almost universal. The center bore isn’t a big deal as long as you have a bore spacer. Any Hyundai/Kia 5 lug uses it. If you get Honda 5x114.3 wheels, they need to be machined out to fit the center bore. I was going to get Mustang wheels for mine when I had it. I would have had to get bore spacers but a set of four was only like $25 from Summit.

They look good:

Kinja'd!!!

Kinja'd!!!


Kinja'd!!! BeaterGT > Grindintosecond
04/03/2018 at 13:21

Kinja'd!!!0

Did it for my C5Z, found the fronts...

Kinja'd!!!

And apparently my back wheels don’t exist but they spit out the right info for them.

Kinja'd!!!


Kinja'd!!! ItalianJobR53 - now with added 'MERICA and unreliability > Grindintosecond
04/03/2018 at 13:23

Kinja'd!!!0

Kinja'd!!!

Honda Airwave!!


Kinja'd!!! Grindintosecond > ItalianJobR53 - now with added 'MERICA and unreliability
04/03/2018 at 13:53

Kinja'd!!!1

Kinja'd!!!

BAM!!


Kinja'd!!! Galileo Humpkins (aka MC Clap Yo Handz) > Grindintosecond
04/03/2018 at 14:04

Kinja'd!!!0

Kinja'd!!!


Kinja'd!!! ItalianJobR53 - now with added 'MERICA and unreliability > Grindintosecond
04/03/2018 at 14:10

Kinja'd!!!0

Kinja'd!!!

BA BANG!